PRODUCT

AC Motor

□90mm 120W

Product Kinds

1Ph./3Ph. Motor
CONTINUOUS DUTY

Products List

■ PERFORMANCE DATA (DUTY : CONTINUOUS)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Rating Starting Condenser
Input
(W)
Current
(A)
Torque
(kgf·cm)
Speed
(rpm)
Torque
(kgf·cm)
(V) (㎌)
IH9PG120-10 120 1ø100 50 230 1.80 8.99 1300 4.20 250 25.0
60 210 1.80 7.30 1600 5.40
IH9PG120-11 1ø110 60 250 1.80 7.30 1600 6.50 250 25.0
IH9PG120-20 120 1ø200 50 200 1.20 8.99 1300 4.50 450 6.0
60 200 1.20 7.30 1600 5.50
IH9PG120-22 1ø220 60 230 1.20 7.30 1600 6.80 450 6.0
IH9PG120-2C 110 1ø220 50 215 1.02 8.93 1200 6.50 450 6.0
120 1ø240 50 245 1.02 9.74 1200 7.50
IH9PG120-32 120 3ø220 50 250 1.00 8.99 1300 17.00
60 250 1.00 7.30 1600 19.00
IH9PG90-33 120 3ø380 50 250 0.60 8.99 1300 17.00
60 250 0.60 7.30 1600 19.00
IH9PG90-34 120 3ø440 50 250 0.50 8.99 1300 17.00
60 250 0.50 7.30 1600 19.00
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다. STRAIGHT축의 모터를 희망하시면 Motor Type의 PG를 S로 바꾸어 주문하십시오. 
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다

※ 삼상 380V~440V 모터에서는 인버터를 사용할 수 없습니다. 권선의 절연이 열화되어 모터가 파손될 수 있습니다.  

  • For motor with straight shaft, please write S in place of PG in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation. 

※ The inverter is not available on three phase 380V~440V motors. Insulation of windings may deteriorate and damage the motor  

■ RATED TORQUE OF GEARED MOTOR

(unit : kg·cm)

Speed of Geared Motor rpm 500 300 200 120 100 60 50 30 20 15 10
Gear Ratio 50Hz 3 5 7.5 12.5 15 25 30 50 75 100 150
60Hz 3.6 6 9 15 18 30 36 60 90 120 180
IH9PG90 + 9H□GB 22 36 55 82 98 147 177 200 200 200 200
21 35 53 80 96 144 172 200 200 200 200
  • 그린상자표시한 감속비의 감속기는 출력축의 회전방향이 모터축의 회전방향과 반대로 됩니다.
  • 감속모터의 회전수(Speed of Geared Motor)는 모터의 회전수 (50Hz에서 1500rpm, 60Hz에서 1800rpm)를 기준하여 산출하였습니다.
    실사용시의 회전수는 부하의 크기에 따라 위의 표보다 2~15% 작게 됩니다.
  • 하얀상자부에는 감속비를 지정하여 주십시오. 감속기는 별도로 판매 됩니다.
  • The rotation of geared motor in green screen is reverse of motor rotation. 
  • Speed of Geared Motor is based on motor synchronous speed. In normal operation, the speed will be 2 to 15 percent lower than above figure. 
  • When ordering gear head, please fill blank □ with gear ratio

■ MOTOR(STRAIGHT SHAFT)  IH9S120  WT 3.2kg

■ GEARED MOTOR  IH9PG120 + 9H□ GB  WT 3.2+1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GB M6×90

■ KEY SPEC

■ GEARED HEAD  9H□ GBF   WT 1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GBF M6×25

■ KEY SPEC

■ DECIMAL GEAR HEAD  9H10XG  WT 0.6kg

■ WIRING DIAGRAM

   
  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.