PRODUCT

AC Motor

□60mm 6W

기본사양

Speed Control
Tacho-Generator Type

제품목록

■ PERFORMANCE DATA (DUTY : CONTINUOUS)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
IHT6PF6-10 6 1ø100 50 90~1400 0.41 0.10 0.24 0.40 250 2.5
60 90~1700 0.41 0.10 0.24 0.40
IHT6PF6-11 1ø110 60 90~1700 0.49 0.12 0.24 0.50 250 2.5
IHT6PF6-20 6 1ø200 50 90~1400 0.41 0.10 0.12 0.40 450 0.7
60 90~1700 0.41 0.10 0.12 0.40
IHT6PF6-22 1ø220 60 90~1700 0.49 0.12 0.12 0.50 450 0.7
IHT6PF6-1U 6 1ø115 60 90~1700 0.49 0.12 0.24 0.50 250 2.5
IHT6PF6-2C 6 1ø220 50 90~1400 0.49 0.12 0.12 0.50 450 0.6
7 1ø240 50 90~1400 0.57 0.14 0.12 0.55

■ PERFORMANCE DATA (DUTY : 30 Min.)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
RHT6PF6-10 6 1ø100 50 90~1400 0.41 0.10 0.30 0.45 250 3.0
60 90~1700 0.41 0.10 0.30 0.45
RHT6PF6-11 1ø110 60 90~1700 0.49 0.12 0.30 0.55 250 3.0
RHT6PF6-20 6 1ø200 50 90~1400 0.41 0.10 0.15 0.45 450 0.8
60 90~1700 0.41 0.10 0.15 0.45
RHT6PF6-22 1ø220 60 90~1700 0.49 0.12 0.15 0.55 450 0.8
RHT6PF6-1U 6 1ø115 60 90~1700 0.49 0.12 0.23 0.60 250 2.5
RHT6PF6-2C 6 1ø220 50 90~1400 0.49 0.12 0.14 0.60 450 0.8
7 1ø240 50 90~1400 0.57 0.14 0.14 0.70
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다.
    STRAIGHT축의 모터를 희망하시면 Motor Type의 PF를 S로 바꾸어 주문하십시오.
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다
  • 정격부하 보다 크거나 주위온도가 40℃이상의 조건에서는 온도상승이 급격히 되므로 연속사용이 불가능 합니다.
  • 회전방향을 바꿀 때에는 반드시 전원을 차단한 후 정지된 상태에서 재결선 하시기 바랍니다.
  • For motor with straight shaft, please write S in place of PF in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation. 
  • It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40
  • when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.

■ MOTOR(STRAIGHT SHAFT)I(R)HT6S6WT 1.0kg

■ GEARED MOTORI(R)HT6PF6 + 6H□ FM(6H□ FB)WT 1.0+0.3/0.4kg

■ BOLT SIZE

No L(mm) GEAR RATIO BOLT SIZE
01 30 1/3 ~ 1/18 M4×60
02 40 1/20 ~ 1/200 M4×70

■ KEY SPEC

  • NONE

■ WIRING DIAGRAM

  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.