PRODUCT

AC Motor

□90mm120W

기본사양

Speed Control
Tacho-Generator Type

제품목록

■ PERFORMANCE DATA (DUTY : CONTINUOUS)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
IHT9PG120-10 120 1ø100 50 90~1400 8.28 2.07 1.80 4.20 250 25.0
60 90~1700 8.28 2.07 1.80 5.40
IHT9PG120-11 1ø110 60 90~1700 9.74 2.43 1.80 6.50 250 25.0
IHT9PG120-20 120 1ø200 50 90~1400 8.28 2.07 1.20 4.50 450 6.0
60 90~1700 8.28 2.07 1.20 5.50
IHT9PG90-22 1ø220 60 90~1700 9.74 2.43 1.20 6.80 450 6.0
IHT9PG120-22 110 1ø220 50 90~1700 8.93 2.23 1.02 6.50 450 6.0
120 1ø240 50 90~1400 9.74 2.43 1.02 7.50

■ PERFORMANCE DATA (DUTY : 30 Min.)

Motor Type Output
(W)
Voltage
(V)
Freq.
(Hz)
Speed Range
(rpm)
Rated Torque Rated Current
(A)
Starting Condenser
1200rpm
(kgf·cm)
90rpm
(kgf·cm)
Torque
(kgf·cm)
(V) (㎌)
RHT9PG120-10 120 1ø100 50 90~1400 8.28 2.07 2.30 6.00 250 30.0
60 90~1700 8.28 2.07 2.30 5.50
RHT9PG120-11 1ø110 60 90~1700 9.74 2.43 2.30 7.50 250 30.0
RHT9PG120-20 120 1ø200 50 90~1400 8.28 2.07 1.30 5.50 450 7.0
60 90~1700 8.28 2.07 1.30 5.50
RHT9PG120-22 1ø220 60 90~1700 9.74 2.43 1.30 7.00 450 7.0
RHT9PG120-2C 110 1ø220 50 90~1400 8.93 2.23 1.14 7.50 450 7.0
120 1ø240 50 90~1700 9.74 2.43 1.14 8.50
  • Motor Type은 감속기 직결용인 피니언축으로 표시하였습니다.
    STRAIGHT축의 모터를 희망하시면 Motor Type의 PG를 S로 바꾸어 주문하십시오.
  • 그린상자표시한 모터는 UL 또는 CE규격을 적용한 TP(Thermal Protect) Type입니다
  • 정격부하 보다 크거나 주위온도가 40℃이상의 조건에서는 온도상승이 급격히 되므로 연속사용이 불가능 합니다.
  • 회전방향을 바꿀 때에는 반드시 전원을 차단한 후 정지된 상태에서 재결선 하시기 바랍니다.
  • For motor with straight shaft, please write S in place of PG in Motor Type. 
  • Motor Type in green screen represents the motors with TP(Thermal Protect) according to UL or CE regulation. 
  • It cannot be used continuously because the temperature rises rapidly when the load is greater than the rated load or the surrounding temperature exceeds 40
  • when changing the direction of rotation, make sure to turn off the power and reconnect it at stopped state.

■ MOTOR(STRAIGHT SHAFT)I(R)HT9S120     WT 3.7kg

■ GEARED MOTORI(R)HT9PG120 + 9H□ GBWT 3.7+1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GB M6×90

■ KEY SPEC

■ GEARED HEAD9H□ GBFWT 1.5kg

■ BOLT SIZE

TYPE BOLT SIZE
9H□ GBF M6×25

■ KEY SPEC

■ DECIMAL GEAR HEAD9H10XGWT 0.6kg

■ WIRING DIAGRAM

  • 모터의 회전방향은 샤프트 끝쪽에서 볼때의 회전방향입니다.
  • 모터의 회전방향 전환은 모터가 완전히 정지한 후 실시하여 주십시오.
  • The direction of rotation is seen from the end of motor shaft.
  • Change the rotation direction of the motor only after the motor stops completely.